E-link China Technology Co.,LTD
Add to Cart
10/100M PoE IEEE802.3af/at Injector IEEE802.3at 30W
PoE Injector Adapter Advantages
► Support 10/100Base-T
► Compliant with Limited Power Source (LPS)
► High Efficiency > 85%
► Low No Load Power Consumption < 0.5W
► Provide 2 LED indicators include Power LED(Green) and PoE LED(Orange)
Technical Indexes
| Ethernet | |
| Standards: | IEEE 802.3 10Base-T Ethernet |
| IEEE 802.3u 100Base-TX Fast Ethernet | |
| Processing Type: | Forward |
| Half-duplex, Full-duplex | |
| Forward Filter Rate: | 148,800pps (100Mbps) |
| Cabling: | 10/100Base-T: Cat5 or above |
| Maximum Distance: | IEEE802.3af/at PoE (30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft) |
| Connector: | LAN: 1 x RJ-45 STP, “Data” Input Port POE: 1 x RJ-45 STP, “Data + Power” Output Port AC Connector: 1 x AC Input power socket, IEC-60320 C13 |
| Environmental | |
| Operating Temperature: | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature: | -20°C to 70°C (-4°F to 158°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF: | >200,000hrs |
| Electrical and Mechanical | |
| Input Voltage Range: | 100-240V AC @50/60Hz. |
| Output Voltage: | DC 48V |
| Power Consumption: | 30 watts max. |
| PoE (Power over Ethernet) | |
| Standard: | IEEE 802.3af |
| IEEE 802.3at | |
| Port: | RJ45 |
| Pin Assignment | Data provide over pairs 1/2(+) and 3/6(-) Power over spare pairs 4/5(+) and 7/8(-) |
| PoE Power Output | DC 48V/30-watt PoE via 2-pairs |
Overview
LNK-POE200AT 30W – 48V Gigabit PoE Injector is a long-distance driving, fast network performing, strong PoE Output IEEE802.3af/at
certified midspan. It is a single port indoor PoE injector that can provide up to 30W based on the IEEE 802.3af/at standard.
Application
Ordering Information
| Model | Description |
| LNK-POE200AT | PoE Injector with Power Cord: 10/100Mbps, IEEE 802.3at 30W |