The transceiver consists of two sections: The transmitter section incorporates a FP laser. The receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA).

SFP Fiber Transceivers Advantages

1×9 package with SC connector
1310nm FP Laser and PIN photodetector
20Km transmission with SMF
+5.0V single power supply
LVPECL compatible data input/output interface
Low EMI and excellent ESD protection
laser safety standard IEC-60825 compliant
Compatible with RoHS

Performance specifications

Parameter	Symbol	Minimum	Maximum	Units
Storage Temperature	Tst	-40	+85	°C
Operating Temperature	Top	0	+70	°C
Supply Voltage	Vcc	0	+5	V
Input voltage	Vin	GND	Vcc
Lead Soldering Temperature & Time	240/10			°C/s

Parameter	Symbol	Minimum	Maximum	Units
Supply Voltage	Vcc	4.5	5.5	V
Ambient operating Temperature	Top	0	+70	°C
Operating Relative Humidity	-	5	95	%

Parameter	Symbol	Min.	Typ.	Max.	Units
Data rate	-	-	155	-	Mb/s
Center Wavelength	lo	1260	1310	1360	nm
Output Spectral width	Dl	-	-	4	nm
Average Optical Output Power	Po	-15	-	-3	dBm
Extinction Ratio	Er	12	-	18	dB
Rise/Fall Time(20%~80%)	Tr/Tf			0.26	ns
Total jitter	Tj			0.43	UI
Optical Eye Diagram	IEEE 802.3u and ANSI Fibre Channel Compatible
Input differential impendence	Zdiff		100		Ohm

Inquiry Cart 0