
Add to Cart
24 Ports 10/100/1000M PoE Power Splitter Ethernet Network Surge Protector
24-ports 10/100/1000M Ethernet Network Surge Protector
Advantages
► 220VAC Control Line, RJ45 port;
► Multi-level protection circuit, residual depression;
► Four wire protection: 1.2.3.6 line
► High transmission band, fast response, low insertion loss;
► Exquisite appearance, small size, easy to stall;
► Ground through a special process to avoid signal interference.
► It has huge flow capacity, sensitive reaction
► Excellent performance, and low-loss insert
Item | Specification | ||
Model | LNK-SPD2400G | ||
Ethernet | Continuous Operating Voltage | 5V | |
Maximum Working Voltage | 6V | ||
Nominal Discharging Current In (8/20us) | 2KA | ||
Maximum Discharging Current Max (8/20us) | 3KA | ||
Limit Voltage Up | 1~2 | <20V | |
10/700us | 3~6 | <20V | |
Insulation Resistance | ≥0.4MΩ | ||
Insertion Loss | ≤0.2dB | ||
Transmission Rate | 10/100/1000Mbps | ||
Response Time | ≤0.5ns | ||
Protection Pins | 1, 2, 3, 6 | ||
Protection lines | 24 Channels | ||
Environmental | Operating Temperature | -20℃~70℃ | |
Storage Temperature | -20℃~95℃ | ||
Relative Humidity | 5% to 95% non-condensing | ||
Stability | MTBF | >30000h |
This product is applicable to the lightning and electric surge protection of the Ethernet signal circuit, control wiring and power circuit of monitor camera. It can combine the above mentioned lightning protection function into one. Its housing adopts integrated iron structure with small volume and ultra low residual pressure output. Design of this product considers fully that the electrode capacitance and distributed capacitance would lessen data signaling with small insertion loss, which can satisfy the requirement of video signal transmission, and can response to the transient over voltage quickly.
Ordering Information
Model | Description |
LNK-SPD2400G | 24-ports 10/100/1000M Ethernet Network Surge Protector |