E-link China Technology Co.,LTD
E-link China Technology Co.,Ltd. Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
Add to Cart
IEEE802.3AF 802.3AT 4 Port Gigabit POE Injector Passive Power Supply
4-Port 10/100M Passive POE power supply
Advantages:
► Panel 4 integrating passive POE injector suitable for powering up to eight devices.
► The RJ45 connectors on one side are connected Ethernet ports with no power (switch) on the opposite side of the device used to connect power for Ethernet cable.
► Are used to power the two unused pairs of the Ethernet cable
► Power couples: 4.5 (positive pole) / 7.8 (negative pole)
Specifications
| Type | Passive POE power supply |
| Input Voltage | 12-57Vdc |
| Input Current | 1.5A max |
| Input Type | Passive |
| Output Voltage / Power | 12-57Vdc, 1.5A max |
| Output type | Single output 4*RJ45 connector ---POE 4*RJ45 connector ----LAN |
| Ethernet speed | 10/100Mbps Pin 45+78-, 2 pairs |
| Internet standard | NO Compliance IEEE802.3AF/802.3AT |
| Material | Plastic |
| Approval | CE/ROHS/FCC |
| Warranty | 3 year |
| Output Ripple | 1% Max |
| Efficiency | ≥80% |
| Response Time | <1ns |
| Combined Load Regualtion | ±3% |
| Combined Line Regualtion | ±5% |
| LED indicator | Power on, Green (With Plastic enclosure) |
| Operating Temp | 0 to 40℃ (32 to 104℉) |
| Storage Temp | (-)20 to 85 ℃ ( -22 to 158 ℉) |
| Operating Humidity | 10~ 90% Non condensing |
This Power over Ethernet module allows you to power up to 4 devices remotely over ethernet wiring up to 328 ft (100 meters) away. Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable. Standard Ethernet uses 2 of the 4 pairs, passive POE uses unused pins 4/5 for plus power, and 7/8 for ground.Many popular devices like Cameras, IP Phones, WiFi Access Points use this method to centralize the power source.
Ordering Information
| LNK-POE-4P | 4-Port 10/100M Passive PoE Power Supply: 4*RJ45 connector(POE) + 4*RJ45 connector(LAN), Input Voltage-12~57V, Output Voltage-12-57VDC 1.5A max |