E-link China Technology Co.,LTD
E-link China Technology Co.,Ltd. Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
Add to Cart
SFP Optical Module 10G Bidirectional SFP Module Fiber Optic Transceiver Connector
Commercial SFP Module Advantages
► Hot-pluggable SFP footprint
► RJ45 Connector
► Supports Links up to 30m using Cat 6a/7 Cable
► Fully metallic enclosure for low EMI
High-speed Electrical Interface Transmission Line-SFP
| Parameter | Symbol | Min. | Typ | Max | Units | Notes/Conditions |
| Line Frequency | fL | 10 | 125 | 1000 | MHZ | 5-level encoding,per IEEE 802.3 |
| Tx Output Impedance | Zout,TX |
| 100 |
| Ohm | Differential,for all frequencies between 1MHz and 125MHz |
| Rx Input Impedance | Zin,RX |
| 100 |
| Ohm | Differential,for all frequencies between 1MHz and 125MHz |
The LNK-SFP-10G-T has an input voltage range of 3.3V +/-5%,The 4 V maximum voltage is not allowed for continuous operation. E-link transceivers are Class 1 Laser Products comply with FDA regulations. Meet Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of EN 60950.
Note:
1.Clock tolerance is +/- 50 ppm
2.By default, the LNK-SFP-10G-T is a full duplex device in preferred master mode
3.Automatic crossover detection is enabled. External crossover cable is not required
4. Multi- BASE-T operation requires the host system to have an SGMII interface with no clocks.
Ordering information
| Part No. | Data Rate | Laser | Fiber Type | Distance | Optical Interface |
| LNK-SFP-10G-T | 10G | N/A | N/A | 30m | RJ45 |